OSMO MAINTENANCE OIL

Advantages: Ideal for public and commercial use. Fast drying Safe for humans, animals and plants when dry Cleans and rejuvenates the flooring Removes tough stains such as grease and shoe polish Occasional maintenance without the need for sanding Product Information Coverage: Approximately 40-60 square metres per litre with one coat Drying time 3-4 hours Sizes: 1 litre, 2.5 litres More Information: A fast drying wood finish for ongoing care and maintenance of oiled and waxed timber flooring which is lightly worn, and is looking dull and lifeless. Available in matt, satin, anti-slip and white transparent for floors finished with one of Osmo's white oils. While this is an Osmo product, it is possible to use it over other oil and wax floor finishes, however a trial application is essential to determine suitability. Maintenance Oil is also a renovation product. It's timely use can prevent major sanding and renovation work. However, if the existing surface is badly scratched or worn, it should be lightly sanded and finished with one of the Osmo Polyx®-Oils, rather than use Maintenance Oil. Maintenance Oil is especially recommended for high traffic areas such as restaurants and cafes etc. It needs to be applied very thinly using a low nap microfibre roller or single disc, low speed floor polisher with a white pad. Note: A buffer such as Osmo's Floorex machine should not be used to apply Maintenance Oil matt on floors finished with Polyx®-Oil matt, as it will buff the matt finish to a higher sheen level. On floors finished with Polyx®-Oil matt, Osmo recommend using only a microfibre roller to apply the Maintenance Oil, then leave to dry.